initial commit, 4.5 stable

thirdparty/jolt_physics/Jolt/Physics/Collision/ManifoldBetweenTwoFaces.cpp

@@ -0,0 +1,248 @@
+// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
+// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
+// SPDX-License-Identifier: MIT
+
+#include <Jolt/Jolt.h>
+
+#include <Jolt/Physics/Collision/ManifoldBetweenTwoFaces.h>
+#include <Jolt/Physics/Constraints/ContactConstraintManager.h>
+#include <Jolt/Geometry/ClipPoly.h>
+#ifdef JPH_DEBUG_RENDERER
+	#include <Jolt/Renderer/DebugRenderer.h>
+#endif // JPH_DEBUG_RENDERER
+
+JPH_NAMESPACE_BEGIN
+
+void PruneContactPoints(Vec3Arg inPenetrationAxis, ContactPoints &ioContactPointsOn1, ContactPoints &ioContactPointsOn2 JPH_IF_DEBUG_RENDERER(, RVec3Arg inCenterOfMass))
+{
+	// Makes no sense to call this with 4 or less points
+	JPH_ASSERT(ioContactPointsOn1.size() > 4);
+
+	// Both arrays should have the same size
+	JPH_ASSERT(ioContactPointsOn1.size() == ioContactPointsOn2.size());
+
+	// Penetration axis must be normalized
+	JPH_ASSERT(inPenetrationAxis.IsNormalized());
+
+	// We use a heuristic of (distance to center of mass) * (penetration depth) to find the contact point that we should keep
+	// Neither of those two terms should ever become zero, so we clamp against this minimum value
+	constexpr float cMinDistanceSq = 1.0e-6f; // 1 mm
+
+	ContactPoints projected;
+	StaticArray<float, 64> penetration_depth_sq;
+	for (ContactPoints::size_type i = 0; i < ioContactPointsOn1.size(); ++i)
+	{
+		// Project contact points on the plane through inCenterOfMass with normal inPenetrationAxis and center around the center of mass of body 1
+		// (note that since all points are relative to inCenterOfMass we can project onto the plane through the origin)
+		Vec3 v1 = ioContactPointsOn1[i];
+		projected.push_back(v1 - v1.Dot(inPenetrationAxis) * inPenetrationAxis);
+
+		// Calculate penetration depth^2 of each point and clamp against the minimal distance
+		Vec3 v2 = ioContactPointsOn2[i];
+		penetration_depth_sq.push_back(max(cMinDistanceSq, (v2 - v1).LengthSq()));
+	}
+
+	// Find the point that is furthest away from the center of mass (its torque will have the biggest influence)
+	// and the point that has the deepest penetration depth. Use the heuristic (distance to center of mass) * (penetration depth) for this.
+	uint point1 = 0;
+	float val = max(cMinDistanceSq, projected[0].LengthSq()) * penetration_depth_sq[0];
+	for (uint i = 0; i < projected.size(); ++i)
+	{
+		float v = max(cMinDistanceSq, projected[i].LengthSq()) * penetration_depth_sq[i];
+		if (v > val)
+		{
+			val = v;
+			point1 = i;
+		}
+	}
+	Vec3 point1v = projected[point1];
+
+	// Find point furthest from the first point forming a line segment with point1. Again combine this with the heuristic
+	// for deepest point as per above.
+	uint point2 = uint(-1);
+	val = -FLT_MAX;
+	for (uint i = 0; i < projected.size(); ++i)
+		if (i != point1)
+		{
+			float v = max(cMinDistanceSq, (projected[i] - point1v).LengthSq()) * penetration_depth_sq[i];
+			if (v > val)
+			{
+				val = v;
+				point2 = i;
+			}
+		}
+	JPH_ASSERT(point2 != uint(-1));
+	Vec3 point2v = projected[point2];
+
+	// Find furthest points on both sides of the line segment in order to maximize the area
+	uint point3 = uint(-1);
+	uint point4 = uint(-1);
+	float min_val = 0.0f;
+	float max_val = 0.0f;
+	Vec3 perp = (point2v - point1v).Cross(inPenetrationAxis);
+	for (uint i = 0; i < projected.size(); ++i)
+		if (i != point1 && i != point2)
+		{
+			float v = perp.Dot(projected[i] - point1v);
+			if (v < min_val)
+			{
+				min_val = v;
+				point3 = i;
+			}
+			else if (v > max_val)
+			{
+				max_val = v;
+				point4 = i;
+			}
+		}
+
+	// Add points to array (in order so they form a polygon)
+	StaticArray<Vec3, 4> points_to_keep_on_1, points_to_keep_on_2;
+	points_to_keep_on_1.push_back(ioContactPointsOn1[point1]);
+	points_to_keep_on_2.push_back(ioContactPointsOn2[point1]);
+	if (point3 != uint(-1))
+	{
+		points_to_keep_on_1.push_back(ioContactPointsOn1[point3]);
+		points_to_keep_on_2.push_back(ioContactPointsOn2[point3]);
+	}
+	points_to_keep_on_1.push_back(ioContactPointsOn1[point2]);
+	points_to_keep_on_2.push_back(ioContactPointsOn2[point2]);
+	if (point4 != uint(-1))
+	{
+		JPH_ASSERT(point3 != point4);
+		points_to_keep_on_1.push_back(ioContactPointsOn1[point4]);
+		points_to_keep_on_2.push_back(ioContactPointsOn2[point4]);
+	}
+
+#ifdef JPH_DEBUG_RENDERER
+	if (ContactConstraintManager::sDrawContactPointReduction)
+	{
+		// Draw input polygon
+		DebugRenderer::sInstance->DrawWirePolygon(RMat44::sTranslation(inCenterOfMass), ioContactPointsOn1, Color::sOrange, 0.05f);
+
+		// Draw primary axis
+		DebugRenderer::sInstance->DrawArrow(inCenterOfMass + ioContactPointsOn1[point1], inCenterOfMass + ioContactPointsOn1[point2], Color::sRed, 0.05f);
+
+		// Draw contact points we kept
+		for (Vec3 p : points_to_keep_on_1)
+			DebugRenderer::sInstance->DrawMarker(inCenterOfMass + p, Color::sGreen, 0.1f);
+	}
+#endif // JPH_DEBUG_RENDERER
+
+	// Copy the points back to the input buffer
+	ioContactPointsOn1 = points_to_keep_on_1;
+	ioContactPointsOn2 = points_to_keep_on_2;
+}
+
+void ManifoldBetweenTwoFaces(Vec3Arg inContactPoint1, Vec3Arg inContactPoint2, Vec3Arg inPenetrationAxis, float inMaxContactDistance, const ConvexShape::SupportingFace &inShape1Face, const ConvexShape::SupportingFace &inShape2Face, ContactPoints &outContactPoints1, ContactPoints &outContactPoints2 JPH_IF_DEBUG_RENDERER(, RVec3Arg inCenterOfMass))
+{
+	JPH_ASSERT(inMaxContactDistance > 0.0f);
+
+#ifdef JPH_DEBUG_RENDERER
+	if (ContactConstraintManager::sDrawContactPoint)
+	{
+		RVec3 cp1 = inCenterOfMass + inContactPoint1;
+		RVec3 cp2 = inCenterOfMass + inContactPoint2;
+
+		// Draw contact points
+		DebugRenderer::sInstance->DrawMarker(cp1, Color::sRed, 0.1f);
+		DebugRenderer::sInstance->DrawMarker(cp2, Color::sGreen, 0.1f);
+
+		// Draw contact normal
+		DebugRenderer::sInstance->DrawArrow(cp1, cp1 + inPenetrationAxis.Normalized(), Color::sRed, 0.05f);
+	}
+#endif // JPH_DEBUG_RENDERER
+
+	// Remember size before adding new points, to check at the end if we added some
+	ContactPoints::size_type old_size = outContactPoints1.size();
+
+	// Check if both shapes have polygon faces
+	if (inShape1Face.size() >= 2 // The dynamic shape needs to have at least 2 points or else there can never be more than 1 contact point
+		&& inShape2Face.size() >= 3) // The dynamic/static shape needs to have at least 3 points (in the case that it has 2 points only if the edges match exactly you can have 2 contact points, but this situation is unstable anyhow)
+	{
+		// Clip the polygon of face 2 against that of 1
+		ConvexShape::SupportingFace clipped_face;
+		if (inShape1Face.size() >= 3)
+			ClipPolyVsPoly(inShape2Face, inShape1Face, inPenetrationAxis, clipped_face);
+		else if (inShape1Face.size() == 2)
+			ClipPolyVsEdge(inShape2Face, inShape1Face[0], inShape1Face[1], inPenetrationAxis, clipped_face);
+
+		// Determine plane origin and normal for shape 1
+		Vec3 plane_origin = inShape1Face[0];
+		Vec3 plane_normal;
+		Vec3 first_edge = inShape1Face[1] - plane_origin;
+		if (inShape1Face.size() >= 3)
+		{
+			// Three vertices, can just calculate the normal
+			plane_normal = first_edge.Cross(inShape1Face[2] - plane_origin);
+		}
+		else
+		{
+			// Two vertices, first find a perpendicular to the edge and penetration axis and then use the perpendicular together with the edge to form a normal
+			plane_normal = first_edge.Cross(inPenetrationAxis).Cross(first_edge);
+		}
+
+		// If penetration axis and plane normal are perpendicular, fall back to the contact points
+		float penetration_axis_dot_plane_normal = inPenetrationAxis.Dot(plane_normal);
+		if (penetration_axis_dot_plane_normal != 0.0f)
+		{
+			float penetration_axis_len = inPenetrationAxis.Length();
+
+			for (Vec3 p2 : clipped_face)
+			{
+				// Project clipped face back onto the plane of face 1, we do this by solving:
+				// p1 = p2 + distance * penetration_axis / |penetration_axis|
+				// (p1 - plane_origin) . plane_normal = 0
+				// This gives us:
+				// distance = -|penetration_axis| * (p2 - plane_origin) . plane_normal / penetration_axis . plane_normal
+				float distance = (p2 - plane_origin).Dot(plane_normal) / penetration_axis_dot_plane_normal; // note left out -|penetration_axis| term
+
+				// If the point is less than inMaxContactDistance in front of the plane of face 2, add it as a contact point
+				if (distance * penetration_axis_len < inMaxContactDistance)
+				{
+					Vec3 p1 = p2 - distance * inPenetrationAxis;
+					outContactPoints1.push_back(p1);
+					outContactPoints2.push_back(p2);
+				}
+			}
+		}
+
+	#ifdef JPH_DEBUG_RENDERER
+		if (ContactConstraintManager::sDrawSupportingFaces)
+		{
+			RMat44 com = RMat44::sTranslation(inCenterOfMass);
+
+			// Draw clipped poly
+			DebugRenderer::sInstance->DrawWirePolygon(com, clipped_face, Color::sOrange);
+
+			// Draw supporting faces
+			DebugRenderer::sInstance->DrawWirePolygon(com, inShape1Face, Color::sRed, 0.05f);
+			DebugRenderer::sInstance->DrawWirePolygon(com, inShape2Face, Color::sGreen, 0.05f);
+
+			// Draw normal
+			float plane_normal_len = plane_normal.Length();
+			if (plane_normal_len > 0.0f)
+			{
+				RVec3 plane_origin_ws = inCenterOfMass + plane_origin;
+				DebugRenderer::sInstance->DrawArrow(plane_origin_ws, plane_origin_ws + plane_normal / plane_normal_len, Color::sYellow, 0.05f);
+			}
+
+			// Draw contact points that remain after distance check
+			for (ContactPoints::size_type p = old_size; p < outContactPoints1.size(); ++p)
+			{
+				DebugRenderer::sInstance->DrawMarker(inCenterOfMass + outContactPoints1[p], Color::sYellow, 0.1f);
+				DebugRenderer::sInstance->DrawMarker(inCenterOfMass + outContactPoints2[p], Color::sOrange, 0.1f);
+			}
+		}
+	#endif // JPH_DEBUG_RENDERER
+	}
+
+	// If the clipping result is empty, use the contact point itself
+	if (outContactPoints1.size() == old_size)
+	{
+		outContactPoints1.push_back(inContactPoint1);
+		outContactPoints2.push_back(inContactPoint2);
+	}
+}
+
+JPH_NAMESPACE_END